Switching from linear to cyclic δ‐Polyvalerolactone synthesized via zeolitic imidazolate framework as a catalyst: A promising approach

A series of spray dried zeolitic imidazolate frameworks (ZIFs = ZIF‐8, ZIF‐67, and Zn/Co‐ZIF) are used as a catalyst for the bulk ring‐opening polymerization of δ‐valerolactone without any co‐catalyst to generate polyvalerolactone. Interestingly, using the same catalyst under the same reaction conditions could manipulate the structure of the product polymer, and thus its physical properties. Thus, using a dried substrate leads to the formation of the cyclic polymer while a linear polymer was formed on using the commercially available substrate. An activated monomer mechanism has been suggested where the propagating zinc alkoxide undergoes an intramolecular transesterification to release cyclic or linear polyvalerolactone. The ROP of δ‐VL without drying shows that the polymeric zwitterions have little tendency to cyclize in the presence of moisture. At 140 °C, ZIF‐8 shows a superior catalytic activity resulting in the production of cyclic polyvalerolactone having a high molecular weight as compared to ZIF‐67 or Zn/Co‐ZIF due to the presence of highly active sites. The catalyst could be recycled and reused without any significant loss of catalytic activity.     

Behavior of metal complexes of polyacrylic acid in solutions

Metal complexes of polyacrylic acid containing Li, Li, and Cu, or Li and Zn have been studied in saline aqueous solutions using molecular hydrodynamics and light scattering methods. Intrinsic viscosities, weight-average molar masses, hydrodynamic radii, and radii of gyration were obtained. It was shown that the macromolecules of polymetalloacrylates containing divalent metals form small and large supramolecular structures, their dimensions, and composition being dependent on the ionic strength of the solution.     

Carbon Paste Composite with Co3O4 as a New Electrochemical Sensor for the Detection of Allura Red by Reduction

The detection of Allura red (AR) by electrochemical reduction using a different electrode from the conventional mercury electrode is presented. A carbon paste with cobalt (II, III) oxide composite electrode (CoO_x/CPE) is reported for the first time for the detection of AR. Moreover, others dyes such as tartrazine (TZ), sunset yellow (SY), amaranth (AM), Ponceaut 4‐R (P‐4R), and Sudan (SD) as well as pharmaceutical agents such as paracetamol (PMC) that are present in samples that contained AR did not show a reduced signal between 0.0 and ?0.3 V, which is the potential range where AR reduction was observed. The surface electroactivity was studied using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and scanning electron microscopy (SEM). The presence of CoO_X increased the cathodic peak current for AR by more than 50 % and 65 % via CV and square wave voltammetry (SWV), respectively, compared with an unmodified carbon paste electrode. Under the optimal parameters, (pH=3.0, accumulation time (t_ACC)=60 s and accumulation potential (E_ACC)=0.50 V), the detection limit for AR was 0.05 μmol L^?1. The new sensor was sensitive and stable for the detection of AR. Moreover, it was easily manufactured and very convenient for food samples such as soft and isotonic drinks as well as chili sauce.     

Self‐emulsion polymerization of amphiphilic monomers—a green route to synthesis of polymeric nanoscaffolds

Self‐emulsion polymerization (SEP), a green route developed by us for the polymerization of amphiphilic monomers, does not require any emulsifier or an organic solvent except that the water‐soluble initiators such as 2,2′‐azobis[2‐(2‐imidazolin‐2‐yl)propane]dihydrochloride (VA‐044) and potassium persulfate (KPS) are only used. We report here the polymer nanoscaffolds from a number of amphiphilic monomers, which can be used for in situ encapsulation of a variety of nanoparticles. As a demonstration of the efficacy of these nanoscaffolds, the synthesis of a biocompatible hybrid nanoparticle (nanohybrid), prepared by encapsulating Fe₃O₄ magnetic nanoparticle (Fe₃O₄ MNPs) in poly(2‐hydroxyethyl methacrylate) in water, for MRI application is presented. The nanohybrid prepared following the SEP in the form of an emulsion does not involve the use of any stabilizing agent, crosslinker, polymeric emulsifier, or surfactant. This water‐soluble, spherical, and stable nanohybrid containing Fe₃O₄ MNPs of average size 10 ± 2 nm has a zeta potential value of ?41.89 mV under physiological conditions. Magnetic measurement confirmed that the nanohybrid shows typical magnetic behavior having a saturation magnetization (Ms) value of 32.3 emu/g and a transverse relaxivity (r2) value of 29.97 mM^?1 s^?1, which signifies that it can be used as a T2 contrast agent in MRI. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019     

Melting thermodynamics of oligonucleic acids conjugated with relatively solvophobic linear polymers: A coarse‐grained molecular simulation study

Oligonucleic acids (ONAs), such as DNA and RNA, are used in various biotechnology and nanotechnology applications due to their ability to form a double helix that is stable at low temperature and melts at high temperatures. The melting temperature (T_m) of ONA duplexes can be tuned by the ONA composition, sequence, length and concentration, solvent quality, and salt concentration and by conjugation to other macromolecules. In this article, we use coarse‐grained (CG) molecular simulations to study ONAs conjugated with linear homopolymers that are relatively more solvophobic than the ONA. We study charged and stiff 8‐mer ONAs (e.g., DNA) and neutral and flexible 8‐mer ONAs (e.g., peptide nucleic acids or PNA), and vary the composition (or G‐C content) and sequence of ONA, conjugated homopolymer lengths and solvent quality for the polymer. For neutral and flexible ONAs, as the solvent quality worsens for the polymer, the ONA melting temperature increases from that of unconjugated ONA. The melting curves broaden with polymer length and worsening solvent quality, especially for ONAs with higher G‐C content. For charged and stiff ONAs, as the solvent quality worsens, the ONA melting temperature decreases compared to unconjugated ONA while the width of the melting curve remains the same. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 1196–1208     

Investigation of the interaction between protein and europium doped polymer

The interactions between bovine serum albumin (BSA) and polymer (poly (METAC-co-NIPAm-co-Eu(AA)3Phen), PMNEu) containing rare earth element (Europium) were detailedly investigated by both of experimental techniques, such as fluorescence spectroscopic analysis, zeta-potential characterization, hydrodynamic size measurements and transmission electron microscopy (TEM) observation, and theoretical calculations. As a result, we concluded that PMNEu could interact with BSA through electrostatic force and quench the fluorescence of BSA, which was regarded as the static quenching mechanism. In addition, the binding constant and binding sites number of BSA with PMNEu were calculated, and the distance between PMNEu and BSA was also estimated to be 1.9?nm based on Föster’s theory. Furthermore, the two fluorescence peaks of PMNEu at 594?nm and 618?nm were detected, and the density of them increased with the more BSA being added to couple with PMNEu. Additionally, The zeta-potential results confirmed the electrostatic interaction mode between BSA and PMNEu, which was concluded with the previous thermodynamic analysis. At last, the results from the hydrodynamic size measurement had a good agreement with those from the TEM observation about the structure and size variation during the complexation of PMNEu with different concentrations of BSA.     

通过宽线固体核磁共振氢谱研究半晶高分子的相结构

宽线固体核磁共振氢谱（¹H NMR）是一种研究半晶高分子相结构的经典方法.本文以半晶聚乙烯的宽线固体¹H NMR谱为例，探讨了通过Gaussian/Sinc、Gaussian和Lorentzian函数组合对宽线固体¹H NMR谱图进行拟合的方案，并根据半晶聚乙烯的相结构成分对拟合得到的各信号成分进行归属.并在此基础上探讨了各个相结构中分子链运动与信号线型的相关性，以及利用宽线固体¹H NMR谱测量半晶高分子结晶度存在的困难.     

Correlations between microstructure of α‐row nuclei and polymorphism of shear‐induced iPP/carbon fiber cylindrite

Herein, we reported the formation mechanism of hybrid crystalline (cylindrite) in isotactic polypropylene (iPP)/carbon fiber (CF) via pulling a CF within the iPP melt. The α‐row nuclei layer closely attached to the surface of CF acts as a self‐nucleation site, rather than a heterogeneous nucleation one, to grow cylindrites. As a result, the polymorphic feature of iPP/CF cylindrite is significantly influenced by the microstructure of α‐row nuclei. With decreasing crystallization temperature (T_c), the polymorphic cylindrite changes from pure α‐form to mixed α‐/β‐form and to β‐rich form. The main characteristics of this change include: (a) the outlines of α‐row nuclei layer correspond to wave‐like, saw‐like, and straight lines; (b) the orientation level of iPP molecules in the α‐row nuclei layer become higher; (c) the α‐lamellae rearrange from loose to compact; and (d) the distance between the growth sites of β‐sectors and the surface of CF is evidently longer than in the case of α‐sectors. Moreover, this study provides a guideline for developing the interfacial enhanced iPP/CF composites through manipulation of polymorphic structure in cylindrites. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2019 , 57, 368–377     

Thieno[3,2‐b]Thiophene End‐Capped all‐Sulfur Analog of 3,4‐Ethylenedioxythiophene and its Eletrosynthesized Polymer: Is Distorted Conformation Not Suitable for Electrochromism?

By employing planar thieno[3,2‐b]thiophene (TT) as end‐capped units and famous 3,4‐ethylenedioxythiophene (EDOT) or its all‐sulfur analog 3,4‐ethylenedithiathiophene (EDTT) as cores, two conjugated oligomer, TT‐EDOT‐TT and TT‐EDTT‐TT, have been synthesized and electropolymerized into electrochromic polymer films, P(TT‐EDOT‐TT) and P(TT‐EDTT‐TT), respectively. Due to strongly noncovalent inter/intramolecular interactions from S? S attraction of TT‐EDTT‐TT, it has twisted molecular configuration in contrast to planar TT‐EDOT‐TT. Spectroscopic, electrochemical, morphological as well as theoretical calculation studies of these oligomers or polymers were carried out to reveal the significant influence of such molecular geometry on their physicochemical and optoelectronic properties. According to electrochromic kinetics, P(TT‐EDTT‐TT) presented preferable electrochromic behavior such as the higher optical contrast (70.8%), favorable coloration efficiency (331.3 cm² C^?1) and fast response time (0.72 s). This research will help us deeply understand the effect of spatial organization of precursor molecules on the properties of electrochromic polymers and provides a promising strategy to develop high‐performance electrochromic materials. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1041–1048